Timber’s Green Credentials

www.wlwest.co.uk

There have not been many of my posts that have not praised the flexibility and beauty of timber. In the UK we have a very active promotion of timber through various trade associations including the Timber Trade Federation, but especially in the WOOD FOR GOOD campaign. We should be promoting the use of timber at every opportunity. Those of us in the timber industry truely have a product which is helping the world in its task of healing the global warming problem.

But are you aware of the benefits of the use of timber in helping to deal with climate change issues? Well, here are a few statistics:

  • For every cubic metre of timber or wood products used in construction, approximately one tonne of carbon dioxide is saved.
  • Wood products have some of the best thermal performance properties of any mainstream construction material. Wood insulates 15 times better than concrete, 400 times better than steel and 1,770 times better than aluminium.
  • Europe’s stock of wood products stores an estimated 220 million tonnes of carbon.
  • The timber industry employs nearly 200,000 people in the UK and is worth nearly £20 billion to the UK economy. As demand for wood grows, so will the industry, increasing the strength of the rural economy in the UK.
  • Currently, European forests provide a carbon sink for around 150-200 billion tonnes of carbon dioxide, with an additional 500 million tonnes sequestered annually. These same forests also provide approximately 90% of European timber and wood products, which store an additional 220 million tonnes of carbon dioxide.
  • Climate change experts have claimed that simply by increasing the UK’s forest cover from 12 to 16 per cent, the country could, by 2050, abate up to 10% of our national carbon dioxide emissions.
  • At end-of-life, timber can either be recycled into panel boards and other products or used for renewable energy recovery.
  • Between 12-30 tonnes of carbon can be stored in the fabric and content of an average timber house
  • A ten per cent increase in the percentage of wooden houses in Europe would produce sufficient CO2 savings to account for about 25% of the reductions prescribed by the Kyoto Protocol.

Some impressive figures, I hope you will agree.  Each and every time that we choose a timber product over another material in our lives, we also benefit in another way.

So – wooden doors and windows over plastic, timber beams over steel or concrete, wooden cladding over plastic, wooden garden furniture over steel or plastic – the list is endless.

And………. as we have said so many times, timber is by far more the beautiful raw material.

AT EVERY OPPORTUNITY – USE WOOD!!

Don’t forget, for all of your hardwood and joinery softwood requirements…………………

Call our Sales team on 01798 861611 or email:sales@wlwest.co.uk

Advertisements

‘Its a piece of wood isnt’t it??’

www.wlwest.co.uk

‘Its a piece of wood we can do anything with it’ !!

Can we? There is no doubt that timber is without doubt the most versatile raw material on this earth, but sadly many users really do not understand its properties and what you can and can’t do with it.

There are many questions that need to be asked: Is it being used externally?

Yew

Does it need to be structurally strong? Is it being used for painting? Does it need treatment? Does it need to be easy to work? These are but a few of the questions that need to be considered when you select a species for a project.

So, would you, for example, use Beech for external joinery or fencing – the answer is no, Beech is not a durable species and should not be used outside. Oak in contrast is durable and can be used externally very successfully, however, the sapwood on Oak, indeed all species is not durable and will be susceptible to decay and insect attack. In contrast, sapwood is perfectly acceptable to use inside. I know, I know, I know, some of the cabinet makers and joiners out there will say the contrast in colour is not acceptable!! Well, from a timber merchant’s point of view, sap on Oak is not a defect, so we count it in.

On another tack, would you use American Black Walnut if you wanted a painted finish – No of course you wouldn’t, far too precious a resource and expensive. You would choose a joinery grade softwood or inexpensive hardwood such as American Poplar. Generally softwoods are used for strength and hardwoods for aesthetics – albeit we do have graded structural hardwoods readily available.

We still get many requests for timber not suitable for the end use. There are still some unscrupulous traders that would just sell what they are asked for. This can result in a disaster for the customer. We try to get to know our customers, especially if it is the first time we have met them. We want to understand their requirement, to make sure we supply not only to their requirement but also to suit the end use. Talking to our customers is key – we call it ‘hand holding’.

So – Questions, Questions, Questions – we are here to help.

I guess what I am trying to say is that timber is not just ‘a piece of wood’. Each species has its own character, beauty and abilities for end uses. Our customers do not always understand what species can or can’t do, we do, so – please ask us, we would rather take that extra bit of time to ensure a satisfactory outcome rather than rush and have a complaint.

Don’t forget, for all of your hardwood and joinery softwood requirements…………………

Call our Sales team on 01798 861611 or email: sales@wlwest.co.uk