How Green is your Timber Merchant?

Solar panels 011‘Green credentials’ are certainly topical buzzwords. Businesses are changing the ways they are working, from product sourcing to waste management to Power Generation. As long established Timber Merchants (we have good reason to believe that our forebear’s might have supplied Nelson’s navy!!) we feel that we have been green and managed our bi-products (we hate the word waste) very well over the years, and therefore feel we are very Green. But there is always room for improvement.

The recession has made every business review nearly everything they do and buy to make sure their purchasing decisions are cost effective. I know we have, and reviewed them again and again.Solar 003

So in the middle of 2012 we started investigating the possibility of installing Solar Panels to generate some of our own energy. It seemed a good thing to do given the UK Governments contribution for 20 years through a Feed In Tariff payment scheme. We approached two companies based in the South East of England and after a couple of proposals, we appointed a company called Solar Resources as our supplier. To enable the project to move forward we contacted the Carbon Trust to find a suitable funder, this was achieved with Siemens Finance. So when we came back to work in the New Year the scaffolders moved in, the panels were delivered and in mid-January the engineers started the installation of a 80Kwh system.

Once all of the preliminary work is done, surveys, structural checks etc, the install is done very quickly, and on Thursday 31 January 2013 we generated our very first Kilowatt of power. Being a sawmill we are a major user of electricity, so we anticipate that the 80kwh system that we have installed will supply approximately 24% of our demand. Not much you might think? But you want to see our electricity bill!!

To date we have generated 7904kwh in 4 months, and the weather has not been brilliant, so shine sun, shine!!

But that’s not the end of the Green story, oh no.

Chipping 012There was a time when our ‘bi-products’ had to be almost given away to get rid of them, now all bi-products have a value. What do we call a ‘bi-product’? Well, there are three main products:

  • Slabwood – this is where we are cutting logs and flatten the round sides of the log or where we are cutting a length of timber to width. These can vary in length from 2 metres to 4 metres.
  • Offcuts – this is where we have cut a piece of timber to length and created a short offcut.
  • Sawdust – or more correctly, wood dust and shavings. This is the result Chipping 003of cutting, planing and sanding.

So, what do we do with these bi-products? Well it has been an interesting journey to find good home for them, and periodically the demand for them changes in the nature of the businesses that require it.

With the slabwood we have now found a market for wood chip for biomass fuel. We stockpile our slabwood until we have enough to hire in a chipper, the slabwood is then chipped into a measured size chip, suitable for an automatically fed biomass boiler. We then sell the chip to a chip supplier. This process is volume critical, and it is important that we ensure we have enough to make chipping economical.

Bi Products 003Offcuts are fairly simple, our local customer love this for their fires and woodburners. The only part we have a problem with is the very small offcuts, they still burn, but we are finding hard to convince our customers to take them!!

Dust Collection 004Sawdust has been one area that has gone around the houses a bit. Going back a decade or so it would go to the board manufacturers to make products like chipboard. That industry slowed down on demand and we supplied local farmers and the Polo industry. The farming side has slowed down so a new customer had to be found. So currently it is being supplied either to biomass fuel users, pellet manufacturers or board manufacturers.

So, all in all we feel very proud of our Green Credentials and our contribution in reducing demand on UK power generators and getting the very best value out of our timber resources, after all, it doesn’t grow on trees you know!! (tic)

Advertisements

12 Days of Christmas – Timber Style

www.wlwest.co.uk

M0037We would like to wish all of our customers Past, Present and Future a

VERY MERRY CHRISTMAS and HAPPY NEW YEAR

Walnut burr 2 (2)On the First day of Christmas my Timber Merchant brought to me…….. One WALNUT BURR – can be supplied with a Partridge when in season!, immediately available this Burr is well seasoned and will reveal some beautiful features when cut. This is a very large Burr standing approx 1.4 x 1.6m at its widest points.

On the Second day of Christmas my Timber Merchant brought to me…….. Two Curved Style Gates ideal for Doves to perch on. Curved Braced Gates Sept 2010 003Our skilled gatemakers will make you a superb Curved Style gate or any hardwood gate that you desire in any quantity, just give our team a call.

Boothman 009_2On the Third day of Christmas my Timber Merchant brought to me…….. Three dozen or more square metres of 200mm width flooring (raw material from France). Manufactured in our own workshops to your order, this beautiful hardwood flooring will grace your house for years to come.

On the Forth day of Christmas my Timber Merchant brought to me…….. Four hardwood worktops,PRO Site 001_2 first class to carve your four calling Christmas birds on. All of our hardwood worktops are bespoke, made to your own sizes in our West Sussex workshop. Making a spectacular feature in your kitchen. For Worktops page click here.

Australian and exotic 008On the Fifth day of Christmas my Timber Merchant brought to me…….. Five Turning Blanks, ready cut Rings of hardwood for our Wood Turning enthusiasts. Many different species, sizes and thicknesses on stock. Pop into our shop and have a browse.BALL2

On the Sixth day of Christmas my Timber Merchant brought to me…….. Six Oak Beams, beam 003v2we’re not sure about the Geese laying, but the well air drying Beams are laying in our yard. Various sizes available, these beams are sourced for their Air Drying qualities. We are able to offer planing and profile cutting facilities for beam as well.

Spalted BeechOn the Seventh day of Christmas my Timber Merchant brought to me…….. Seven cubic feet of Spalted Beech, well – not the correct beach to see Swans on, but beautiful when used in furniture. Available in Through & Through boards 100, 80, 54 & 50mm thicknesses.

On the Eighth day of Christmas my Timber Merchant brought to me…….. Eight fencers a Picture 172v2Fencing, well their not quite milk maids but they can fence a dairy pretty quickly. Yes, we have a Fence Installing Department as well. Trading as PRO Fencing and based in Farnham, Surrey our team can supply and install all types of fences. From timber fences and gates to steel security and ball court systems. Give Martin or Chris a call on 01252 726391 email: enquiries@profencing.co.uk

008On the Ninth day of Christmas my Timber Merchant brought to me…….. Nine Country Oak Doors, these will definitely get your Ladies a’dancing when they see them hung in your house. Again manufactured to your sizes in our West Sussex workshop out of beautiful Quercus Robur – Oak to you and me, these can be either Ledged and Braced or just Ledged. We can offer discounts on higher quantities.

On the Tenth day of Christmas my Timber Merchant brought to me…….. Ten Aussie Australian and exotic 005Burrs although you might not need ten! These will get the Lords a’leaping when the’re turning into elegant platters. We import these directly from Western Australia. Selected individually by our supplier these are amazing pieces of Australian timber. Available in Coolibah, Brown Mallee, Sheoak, Red Gum, Jarrah, Yellow Box, Silky Oak and White Top. As these are aimed at the craftsman they are in smaller sizes, call our shop or email them on shop@wlwest.co.uk for details.

DSC00089On the Eleventh day of Christmas my Timber Merchant brought to me…….. Eleven different mouldings, well, we can mould most moulding to your design with all tooling made in house. Even for Organ Pipes!! Yes if you have a requirement for moulded timber for whatever use, give us a call. We can manufacture from scratch to your drawings or we can match most historic moulding. Give our mouldings page a glance, there are many example of styles of moulding there.

HOLLY2On the Twelfth day of Christmas my Timber Merchant brought to me…….. Twelve cubic feet of Ash for TT Oak March 2011 028v2the hoops, Oak for shell and Yellow Pine for the inner hoop for our Drum customers. Yes, we have drum customers we supplied both Through and Through and square edge timber to them. So I think you can see we can meet most requirements for timber. Just call our sales team on 01798 861611 or email sales @wlwest.co.uk

Don’t forget, for all of your hardwood and joinery softwood products and requirements…………………

Call our Sales team on 01798 861611 or email: sales@wlwest.co.uk

Timber Industry – leaders in recycling

www.wlwest.co.uk

 

Bundles of Slabwood awaiting chipping

There cannot be many countries in the world that does not have recycling on its agenda. Clearly, in the UK it is high on our Government’s list. In the timber industry is it really a new thing to do? Or were we really the leaders in recycling?

As a reasonably large Sawmiller and Timber Merchant producing both

Offcuts for Firewood

sawn and machined timber, we produce resonably large quantities of waste, or how we term them –  ‘bi-products’. This means that we have always had to be ‘on the ball’ when it comes to dealing with where we are going to send the bi-product. It just is not logistacally possible to let the waste continue to build up. Nowadays it is not financially, morally or physically possible to send this bi-product to waste tips.

From our point of view we have three areas of bi-product.

  1. Slabwood – that can be the part round side of a log or a strip of timber from a cut to size job.
  2. What we refer to as Firewood – smaller pieces that have arrived from jobs being cut to length.
  3. Wood dust – the result of cutting, planing and sanding timber.

Lets have a look at these three areas.

Slabwood, this product is now sold for woodchip for the fuel industry. Getting chipped into controlled sizes for Heating and (CHP) Combined Heat and Power systems. But what used to happen to it? Well we used to supply it into the chipboard and fibreboard manufacturers also to the paper manufacturers. Some was sold for firewood.

Firewood – small offcuts. Nearly always this was used for ……. yes you guessed it ….. firewood, and still is.

Wood Dust being collected for pellet production

Wood dust – We now send the bullk of this bi-product to be made into pellets for ….. wood fuel. A small amount still is used for animals. Originally the bulk would have been used for animals. About 4 or 5 decades ago there was a time when it was dumped and it had little if no value. Now, we are able to sell it. This one part of our bi-product is the one that we have not always been able to recycle, thankfully now we can.

Pellets

So, I think that we probably beat the glass recyclers (one of the first to recycle – with the exception of the times of returned beer, lemonade and milk bottles for deposits!!), certainly we have beaten the plastic recyclers and many of the more recent recycling projects.

So, throwing down the challenge, I think the timber industry was probably one of the leaders in recycling, we just didn’t know it. So a leading green industry? I think we must be near the front aren’t we?

Post a reply if you have other industries that have been recycling for decades. Or if you have alternative uses for my bi-products.

For enquiries on our products look at our website listed at the start of the post or:

Call our Sales team on 01798 861611 or email:sales@wlwest.co.uk